07 October 2022
JetScreen! CS on its way to Printing United in Las Vegas. Visit KIWO Inc. booth no. C8718 / 19 - 21 October 2022
The system is transported and installed as a compact, ready-to-use unit
20 September 2022
We are ready to welcome you at Glasstec in Düsseldorf. Visit us in Hall 12 / Booth E04
09 September 2022
A world first from Lüscher Technologies AG
Lüscher Technologies AG is launching the world's first ultra-compact computer-to-screen system JetScreen! CS for the high-end production of screen printing stencils combined with the in-house X!Tend software for optimal image results. The new system can be presented live in the modern demo and training centre in Oftringen, Switzerland
09 September 2022
See you soon at Glasstec in Düsseldorf from 20 - 23 September 2022
A demonstration of our brand new JetScreen! CS can be seen in Hall 12 / booth 12E04
05 September 2022
Lüscher`s new management as of 1 September 2022 (from left)
Stefan Thulin, CSO
Benedikt Strebel, CEO
Peter Spitteler, CTO
The new team will be your competent and reliable partner in the future
29 July 2022
On 1 September 2022, our CEO Peter Berner will hand over the sceptre to Benedikt Strebel, current member of the Executive Board and Vice President Services & Operations. Peter Berner is retiring early and 10 August will be his last working day. He has led Lüscher Technologies AG as CEO for the past 9 years with a great deal of passion, entrepreneurial spirit and enormous expertise. Mr Berner was active in the industry for a total of 40 years.
We would like to thank Peter Berner for his tireless commitment, which has contributed significantly to the success of the company.
18 July 2022
Last week`s training was very successful. Thanks to our distributors Novacel Hellas Ltd Greece and Kaspar Graphic Solutions USA and our Senior Service Technician Pawel Skirlinski
14 July 2022
New MultiDX! 340 in United States
01 June 2022
We are proud of the very first installation of a JetScreen! LT round machine in Italy. Many thanks to our customer Fotoincisione Seritex SNC for your trust in Lüscher
19 May 2022
Installation of a new MultiDX! 320 in Czech Republic
13 May 2022
New XPose! FlexLine Video
04 May 2022
We are at your disposal for any questions!
Print4All in Milan / 3 - 6 May 2022 / Booth B21-B23-C22-C24
28 April 2022
Next machines are ready for shipment
08 April 2022
See you at Print4All in Milan
30 March 2022
Installation of a MultiDX! 320 UV in Germany
24 March 2022
Last week`s training was very successful. Are you interested in a training or a presentation of our CtS and CtP systems? We look forward to welcoming you at our premises in Switzerland or at a live online session
15 March 2022
We look forward to welcoming you at our booth 2760 at the InPrint in Munich
14 March 2022
The next installation of an XPose! FlexLine is coming up. This time in Cuba.
07 March 2022
After successful installation in The Netherlands, we also installed the new MultiDX! in Belgium last week. Thank you The Multitubes Group for your trust in Lüscher!
28 February 2022
New MultiDX! in The Netherlands
24 January 2022
Next installation of a JetScreen! LT in Germany
17 January 2022
Installation of a MultiDX! in USA
22 December 2021
The first JetScreen! LT in the USA is up and running
13 December 2021
Successful installation of a MultiDX! 320. Thank you Teca-Print AG Switzerland for your trust in Lüscher!
8 December 2021
X!Tend - The software which puts your screen printing quality at the highest level
24 November 2021
Another successful installation of an XPose!.
This time in Switzerland
18 October 2021
Last week`s training of our new distributor DSL s.c. Poland was great. Thanks to all for these successful days.
12 October 2021
The first JetScreen! LT delivered to the USA is on its way! Size of the machine: 3400 x 1720 x 2780 mm, here completely disassembled for shipment by sea freight
30 September 2021
We are looking forward to finally participate in trade fairs again in 2022. See you there!
28 September 2021
Successful training of our JetScreen! LT machine, which will soon be delivered to the USA.
20 September 2021
Another successful installation of a MultiDX! in Germany
01 April 2021
Installation of a MultiDX! in Poland
1 March 2021
Lüscher’s new demo and training center
In our new demo and training center in Oftringen, Switzerland, we are pleased to present to you our latest Computer-to-Screen (CtS) and Computer-to-Plate (CtP) systems.
Request either a general presentation, tailored to your particular needs, or ask for a demo where we process your own material for your preferred application. Subsequently, the material will be returned to you for internal evaluation and testing.
Even if you are currently unable to travel due to the circumstances, be assured that we are here for you: We can offer you a live video demo on MS Teams.
3 April 2020
In February 2020, Lüscher Technologies and Daetwyler Graphics relocated from their existing headquarters in Bleienbach to Oftringen with its excellent transportation links.
Taking just 12 months to complete, the companies’ new home boasts a 3’200 m² assembly hall and around 3’000 m² of offices and staff areas. The four-story building has the perfect layout for efficient process and production workflows, offering ideal, state-of-the-art working conditions for employees in all Areas.